0086 186 1055 1470
0086 186 1055 1470
The circulating paper feeder system equipped with the CP circulating paper folding machine is suitable for processing medium and long jobs. It can process a variety of different types of paper with non-stop paper feeding, including: uneven folds Paper, pre-folded, pre-punched and pre-punched paper, etc., greatly save the work intensity of the operator, and the daily production efficiency is about 20% higher than that of the paper feeder on the platform.
It has the following functions and features:
Use stainless steel indirect helical gear design to reduce noise and gear wear
Circular feeder, continuous single sheet paper conveying action (feeding without stopping the machine)
The standard configuration can perform four parallel folding or three vertical knife folding
Crimping knife, slitting knife or creasing knife can be installed
The Internet of Things can be connected to the ERP/MCS system
The electronic knife is controlled by an independent servo motor
The electrical uses PLC and frequency conversion speed regulation
The paper feeding system uses a three-hole suction wheel
Category / Project | CP66/4KL-F four fences and two folding knives | CP78/4KLL-F Four Fence Three Folding Knife | CP80/4KLL-F Four Fence Three Folding Knife |
Maximum paper size | 660x1040mm | 780x1140mm | 800x1200mm |
Minimum paper size | 180x100mm | 200x150mm | 200x150mm |
Foldable paper range | 40-210g/m2 | 40-210g/m2 | 40-210g/m2 |
Foldable paper range | 210m/min | 210m/min | 210m/min |
Power consumption | 7kW | 7kW | 7kW |
Occupation area | 5.4×2.8m | 5.4×2.8m | 5.4×2.8m |
Machine weight | 2.0 tons | 2.0 tons | 2.0 tons |